This article is about configuring general system settings on Reolink NVRs. 

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.

Log in to your NVR, go to Settings > System > General.

mceclip0.png

general.png

 

There are eight options on this page:

  • Device Name: Customize the name of your NVR system.
  • Screen Resolution: Adjust the output resolution of the NVR. 
  • Scrollview Time: When you use Scrollview, you can set the time last on each channel. 
  • Enable "Require account and password verification to unlock screen": With this option enabled, users need to enter the username and password each time when logging in to the system.
  • Auto-Lock Time: This option can be chosen when you enable the above option. It is divided into four types, none, 1 min, 5 min, and 10 min.
  • Enable "Allow to go back to the previous page with a right-click": When this option is enabled, with a right-click, you can go back to the previous page.
  • Mouse sensitivity: Adjust the sensitivity of the mouse.
  • Enable "Status Reminder Icon": With this option enabled, the status reminder icons will be displayed on the preview page.