The following steps describe how to check the network information of Reolink NVRs on the monitor.

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36, NVS36 and RLN12W, NVS12W.

Step 1. Go to the live-view page and click the Settings icon in the bottom right corner to enter the menu. 

settings.png

Step 2. Go to Network on the left-hand side, then click on Network Status to check the network status information of the NVR.

network_status.png