If you need to connect your camera to another different WiFi network, you can refer to the step-by-step tutorial below to change it via the Reolink Client.

Applies to: Reolink WiFi cameras and Reolink battery-powered WiFi cameras

Step 1. Launch the Reolink Client and log in to your camera. Go to Device settings > Network page. Click the WiFi Network Settings icon as marked in the picture below:

network

Step 2. Please select the SSID (network name) of your router that you would like to connect to and input the WiFi password. Please make sure you input the correct WiFi password. Then, click Connect to save the settings.

WiFi Settings

Note: For the Reolink WiFi camera, you can unplug the ethernet cable of the camera after it has been successfully connected to the WiFi you set above.

Also, here is a video for your reference: