Below is an instruction to guide you to use the pan/tilt/zoom function of Reolink cameras via Reolink Client if your camera supports this feature.
Applies to: RLC-423 series, Reolink C2, C2 Pro, E1 Zoom, E1 Outdoor, E1 Outdoor PoE, E1 Outdoor Pro, RLC-523WA, RLC-823A, RLC-823A 16X, Reolink TrackMix series, Reolink Keen, C1, C1 Pro, Argus PT series, Reolink Go PT series, KEEN Ranger PT, E1, E1 Pro, RLC-830A, RLC-411 series, RLC-422 series, RLC-511, RLC-522, RLC-511W, RLC-511WA, RLC-542WA, RLC-811A, RLC-842A, RLC-822A, RLC-833A, RLC-81PA.
Note: Not all the cameras listed above fully support Pan&Tilt&Optical Zoom. You can refer to the table below to know the exact functions they support.
| Functions | Supported cameras |
| Pan&Tilt&Optical Zoom | RLC-423 series, Reolink C2, C2 Pro, E1 Zoom, E1 Outdoor, E1 Outdoor PoE, E1 Outdoor Pro, RLC-523WA, RLC-823A, RLC-823A 16X, Reolink TrackMix series (with zoom only available on the tracking lens) |
| Only Pan&Tilt | Reolink Keen, C1, C1 Pro, Argus PT series, Go PT series, KEEN Ranger PT, E1, E1 Pro, RLC-830A. |
| Only Pan | RLC-81PA. |
| Only Optical Zoom |
RLC-411 series, RLC-422 series, RLC-511, RLC-522, RLC-511W, RLC-511WA, RLC-542WA, RLC-811A, RLC-842A, RLC-822A, RLC-833A. |
Step 1. Launch Reolink Client and connect your PTZ camera, then click the PTZ option on the live view page like the picture below:
Step 2. Control the PTZ.
To control the Pan/Tilt, please click the directional arrows to manually control the direction of the camera. Or click the button in the middle to start an automatic scan, then click it again to stop the auto scan.
- Click "+" or "-" icon to adjust the Pan/Tilt speed on the Speed bar.
- Click "+" or "-" icon to zoom in or out.
- Click "+" or "-" icon to focus near or far.