The following steps describe how to set up the motion detection area via Reolink New UI NVR on the monitor.
Applies to: RLN8-410, RLN16-410 and RLN36
Step 1. Log in to the NVR via an NVR monitor, then go to Settings > Camera page.
Step 2. Select the channel (camera) that you want to set and then choose Detection > Detection Area to enter Detection Area Settings page.
Step 2. Left-click on the interface and drag the mouse to disable the motion detection area. For reducing false alarms, you can exclude the area where you don’t need motion detection. If you want to delete part of the non-detection area, you can repaint directly on the blue grids.
Step3. Click Apply to save your setting.
: Click Add all to set the whole live view as a non-detection area.
: Click Delete all to remove all the non-motion detection areas.
Article is closed for comments.