If there is an area where you don't want the camera to detect, here is an article to guide you to set a motion detection area for Reolink cameras via Reolink Client.
Applies to: All Reolink cameras/NVRs(except for battery-powered cameras without smart detection, such as Argus 2/Pro, Argus 2E/Eco, Reolink Go/Go PT)
Here is a video for your reference:
Step 1. Launch Reolink Client and log in to the camera, then click Camera Settings > Alarm Settings > Detection Zone.
Step 2. Click Set Up under Detection Zone to enter the motion detection zone page.
Note: For battery-powered cameras with smart detection, the setup of the detection zone is slightly different. You can refer to How to Set up Detection Zone for Battery-powered Cameras via Reoink Client.
Step 3. Choose to create a zone over the area that you don't want to receive alerts about. Please don't forget to click the Save button to save your settings.
- Motions in the area covered with gray grids will not be detected.
- For Duo PoE and Duo WiFi, you need to select a specific lens under Detection Zone and click Set Up to enter the motion detection zone page.