How to Set up Smart Person/Vehicle Detection via Reolink PC Client

Applies to:RLC-510A;RLC-810A; RLC-1210A; RLC-520A; RLC-820A; RLC-822A; RLC-1220A; E2 Outdoor;RLC-511WA;RLC-811A; RLK8-510B4-A; RLK8-810B4-A

If you want to set up smart person/vehicle detection for your camera via the Reolink Client, please follow the steps below:

Step 1: Please open your Reolink PC client and go to the device settings and find the " Surveillance" button.>

Step 2: In the camera device settings page, please click the" Surveillance" button, and choose the" Record" button.

Step 3: In the Record Schedule page you will see two options: Alarm & Timer

Under the Alarm schedule, please enable/choose the detection type and then choose the time & date for detection.

There are three detection types: " Any Motion"," Person" and " Vehicle". Please enable/ choose either of them or combine two options or all of them together according to your own needs.

Under the Timer schedule, please enable/choose the time and date you want for continuous recordings. It will save all three detection types: " Any Motion"," Person" or " Vehicle" by default. While playback you can select the detection type you want.

Step 4: Once finish the detection schedule, please click the "Save" button on the bottom of the setting to save your settings.