This article shows you how to set up the Email/Buzzer/Push schedule for NVRs on the monitor.

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.

Here are the steps to set up the schedule of Email notifications, buzzers, and push notifications for NVRs with the new UI on the monitor.

Step 1. Connect the NVR to a monitor/TV, log into the NVR, and go to the Settings page.


Step 2. Click Surveillance and enable Email Alerts, Buzzer or Push Notifications.


Note: If you disable them on this page, you will not receive any email/push notifications/buzzing beeps of your NVR.

Step 3. Click Daily Schedule of Email Alerts, Buzzer or Push Notifications to set up. Take Push Notifications as an example:

Choose the channel you want to set up at the top.


Step 4. Enable the toggle switch. And set up a push schedule for the camera.


Tips: If you don't want to receive push notifications from this camera, just turn it off.