This article will show you how to set up vehicle detection on Reolink NVRs.

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36

Note: To set up the vehicle detection feature via the Reolink NVR system, please make sure you had added the smart person detection cameras to the NVR recorder.

Please refer to the detail How to Set up Smart Person/Vehicle Detection via POE NVR system

Click Daily Schedule of Record, Email Alerts, Buzzer or Push Notifications to set up. Take Record as an example: Select a camera, under the Alarm setting, please enable the Vehicle detection type only and enable the time and date you want for vehicle detection.

settings.png

record_daily_schedule.png

record_vehicle.png

If you want to make the same settings for other cameras, please click the Apply to Other Camera(s) button on the bottom of the settings.