Have no idea about how to initially set up those Reolink WiFi cameras without a LAN port? No worries. This article will guide you through the initial setup via Reolink Client step by step.

Applies to: Reolink Lumus, Reolink E1 Zoom/E1/E1 Pro (without LAN port).

Note: Before the initial setup, download the Reolink Client in the Download Center

Here is a video for your reference:

Step 1. Click the “+” icon and choose UID to enter the UID of your camera, then click Add.

For how to find the UID, refer to How to Find the UID of Your Device



Step 2.  Select Wi-Fi Not Configured, then click Confirm. Then you will hear a voice prompt saying “Please run app, add the camera and set it up” or a repeated ding sound, select correspondingly and click Next.



Step 3.  Type in the WiFi SSID and password to set up a WiFi for this camera, and click Next.

Click the eye icon so that you can check if the WiFi password is correct.


Note: Reolink E1 and Reolink Lumus only support a 2.4 GHz WiFi network; E1 Pro and E1 Zoom can support both 2.4 GHz and 5GHz WiFi network.

Step 4. Place the camera lens in front of the QR code on your computer screen at a distance of about 20cm (8 inches) and scan the QR code. After hearing a beep sound, click Next.


Step 5. Wait around 60 seconds for the camera to connect to the router. After hearing a voice prompt saying “Connection to the router succeeded”, select correspondingly and click Next.


Step 6. Create the password for your camera. Click Next.


Step 7. Name your camera. Then click Finish.


The initialization of your camera is finished. You can get a live view now.