This article will guide you on how to check the camera status on the IP channel page via Reolink PoE NVR monitor, which could help to debug the problem if your camera meets any live view issues.
Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)
Step 1. Launch your Monitor of NVR, and go to Menu > IP channel page.
Step 2. You will find the camera status in the sidebar of the IP channel page. You may refer to Four Types of Status for Reolink Cameras on Reolink POE NVR
Article is closed for comments.