UPnP is a network protocol that allows compliant devices to automatically set port forwarding rules for themselves. If you would like to enable or disable UPnP for your camera or NVR via web browser, you can refer to the instructions below.
Applies to: All Reolink cameras (except Reolink battery-powered cameras, Reolink E1, and Reolink E1 Pro, Reolink Lumus, the add-on cameras)
Step 1. Log in to your camera in the web browser.
Step 2. Click the gear icon on the top right to get to the device settings page.
Step 3. Click Network > Advanced. Toggle the switch to enable or disable UPnP.
Note: You need to enable UPnP on your router as well.
Article is closed for comments.