This article will show you how to enable/disable UPNP via Reolink NVR with a monitor connected.
Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)
If you want to enable/disable UPNP, click Menu > Network > Advanced > UPNP enable/disable, and then click Apply.
Note: You need to enable UPNP on your router too.
Comments
0 comments
Article is closed for comments.