This article will show you how to enable/disable UPNP via Reolink NVR with a monitor connected.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

If you want to enable/disable UPNP, click Menu > Network > Advanced > UPNP enable/disable, and then click Apply.

POE-main-menu.jpg

upnp.png

Note: You need to enable UPNP on your router too.