How to Set the Pre-Motion Recording via Reolink Client (Mac)

Applies to: B400; B800; D400; D800; RLC-410; RLC-410-5MP; RLC-410S; RLC-411; RLC-411-5MP; RLC-411S; RLC-411S-5MP; RLC-420;RLC-420-5MP; RLC-422-4MP; RLC-422-5MP; RLC-423; RLC-423S; RLC-511; RLC-520; C1; C1 Pro; C2; C2 Pro; E1; E1 Pro; E1 Zoom; Reolink Lumus; RLC-210W; RLC-410W; RLC-410W-5MP; RLC-410WS; RLC-411WS; RLC-411WS-5MP; RLC-422W; RLC-423WS; RLC-511W;RLC-422W-5MP；RLN16-410;RLN8-410;RLN8-410-E；RLN4-211W;RLN4-210W

• For all the IP cameras, it will support about 3-6 seconds pre-motion recording by default, and not able to enable/disable it manually on the Mac/ Windows client. In addition, the pre-record time is not able to be adjusted.
• For all the NVR system, it will support about 3-6 seconds pre-motion recording for each channel, and you can manually enable/disable the pre-record settings on the Mac/Windows client.

Please follow the steps below to set the pre-motion recording via Reolink Client (Mac):

Go to Device Settings -> Record ->Recording ->Pre-record.  Then click Save to save your selection.