Applies to: All Reolink cameras and NVRs.
You can add the camera or NVR to Reolink Client by automatically scanning the IP if the camera or NVR is in the same LAN with your computer, and you can refer to the following article:
But if the Client cannot automatically scan the IP address, you can manually enter the IP of your camera or NVR, which can be found on the router interface. You may refer to the following steps:
Step1. Click Add Device, choose IP Address as the register mode, then you can manually enter the IP address, Device Name, Media Port, Username and password of camera. Click OK to add the device.