Applies to: RLN16-410, RLN4-211W, RLN4-210W, RLN8-410.
Step 1. Please plug the LAN port at the back of your NVR into your router with an ethernet cable to access the internet.
Step 2. Click Add Device.
Step 3. Select UID as Register Mode, then fill in the blanks with the UID of your NVR, the User Name (admin by default) and the Password (blank by default), and the Device Name (anything you like). After that, hit OK to add your NVR to the Reolink Client.
If your NVR is on the same local network (LAN) with your PC, the Reolink Client software will add the NVR automatically.
For more methods of adding the NVR, please refer to Add Reolink Products on the LAN via Reolink Client (Mac)