This article shows you how to enable/disable the password via Reolink PoE NVR.

Applies to: Reolink PoE NVRs with hardware H3MB02, H3MB06, H3MB16, and H3MB17

Method 1 Setting via Wizard Button

Step 1. Log in to Reolink PoE NVR with your cameras.

Step 2. Click the wizard button at the right end of the setting page.

setup wizard.png

Step 3.  At the end of the "Setup Wizard" page, please click to enable the password. 

enable_password.png

You don't need to choose it If you want to disable the password.

disable_password.png

Note: After setting to enable the password, you'll need to log in to the system by inputting the password you've set. 

system_login.png

Method 2 Setting via Menu Page

Step 1. Log in to Reolink PoE NVR with your cameras.

Step 2. Click the menu button at the left end of the setting page.

menu_button.png

Step 3. Go to System > General, and you can click to enable the password here.

enable_password-2.png

You don't need to choose it If you want to disable the password.

disable_password-2.png

Note: After setting to enable the password, you'll need to log in to the system by inputting the password you've set. 

system_login.png