How to Set Motion Detection Recording for WiFi NVR

Applies to: RLC-210W; RLC-211W; RLN4-211W; RLN4-210W ; 

Here we'll guide you to set motion detection recording for WiFi NVR: 

Step 1. Log in to your Reolink WiFi NVR on a NVR monitor. Go to Menu -> Recording -> Schedule page, then select the channel (camera). Select Motion and tap on the grids to choose the time you want to enable motion detection recording for, and then click Apply to save the settings. 

Step 2. Enter the Alarm -> Motion page, then refer to Set Up Motion Detection Area via Reolink WiFi NVR to configure the motion detection area for the camera.

Step 3. After you finish Step 2, follow the steps in Set Up Motion Detection Sensitivity via Reolink WiFi NVR to set the motion detection sensitivity.

Step 4. Go back to the Motion page and click Schedule Set to enter the alarm schedule page. Select Alarm and tap on the grids to choose the periods during which you want to enable Alarm for the camera.

Step 5. Go back to Motion interface and click Send Email or Push if you need it. 

Step 6. After completing all the settings above, click the Apply button in the Motion page to finish setting motion detection recording.