Follow the intuitive guide below step by step and you will know how to install Reolink Lumus.

Step 1. Rotate as indicated below to separate the bottom parts from the bracket.

1.release_the_plate.png

Step 2. Drill holes according to the provided mounting hole template and screw the bottom of the bracket onto the wall. Then attach the other part of the bracket onto the bracket bottom.

2.drill_holes.png

Step 3. Fasten the camera to the bracket by turning the screw identified in the following chart counterclockwise.

3.screw_the_camera.png

Step 4. Adjust the camera angle by hand, and get the best field of view.

4.adjust_the_angle.png

Step 5. Secure the camera by turning the part on the bracket identified in the chart clockwise.

5.fasten_the_camera.png

Note: In case you will need to adjust the camera angle later, please loosen the bracket by turning the upper part anti-clockwise.