If your devices support the Audio Alarm (Siren) feature, you can refer to the guide below to set up a schedule via the web browser.
Applies to:E1 Zoom, E1 outdoor, E1 Outdoor PoE, E1 Outdoor Pro, E1 Outdoor CX, RLC-511WA, RLC-523WA, RLC-840WA, RLC-843WA, RLC-540A, RLC-811A, RLC-812A, RLC-823 Series, RLC-824A, RLC-81MA, RLC-81PA, RLC-830A, RLC-833A, RLC-840A, RLC-1240A, RLC-1212A, RLC-1224A, FE-P, FE-W, CX410, CX410W, CX810, Reolink Duo PoE/WiFi, Reolink Duo 2 PoE/WiFi, Reolink Duo Floodlight PoE/WiFi, Reolink TrackMix PoE/WiFi and Reolink Video Doorbell series.
Step 1. Log in to your camera via Web Browsers. Click the gear icon on the top right to get to the device settings page.
Step 2. Click Surveillance > Siren. Toggle the switch to turn it on first.
Step 3. Choose the detection type you want and fill the grids in blue to enable the schedule. One grid means an hour.
Click Save to save the configurations.
If the web interface of your device is an old version, you can refer to the steps below.
Step 1. Log in to your camera via a web browser and go to the device settings page.
Step 2. Go to Alarm > Audio Alarm. Click Enable to turn on the audio alarm and click on the grids to set the schedule as you need. One grid means an hour.
Then click OK to save the settings.