If you want to extend the recording time for microSD card/HDD recording after motion is detected, you can choose to set up post-motion record duration for your Reolink devices. Post-motion Record enables cameras to keep recording for a certain time after the recording-triggering motion event ends. 

Applies to: All Reolink devices except Reolink Go Ranger PT (Hardware version BIPC_560MIX4G32M25SD938MP_R), KEEN Ranger PT and TrackMix LTE (Hardware version BIPC_NT2BCNO38MPC1SD7V5).

Notes:

1. The available post-motion record duration varies from device models.

2. The post-motion record of Reolink Go Ranger PT/KEEN Ranger PT is defaulted to 15 seconds and cannot be changed.

Step-by-Step Instructions

To set up Post-Motion Record for your Reolink devices, go and visit the articles below:

  • Via Reolink App

    Step 1. Login to your Reolink device on Reolink App, then go to the Camera Settings Page.
    trackflex floodlight wifi camera recording app
    Step 2. Go to Camera Recording > Post-recording Duration and select the duration according to your demands.

    camera recording settings post record duration

  • Via Reolink Client

    Log in to your device and go to the Camera Settings > Surveillance > Record > Post-Motion Record. 

    post motion record client

    Note: For cameras linked to the Home Hub series, click down first to open the camera list and then go to Camera Setting page.

    Home hub motion

  • Via Reolink Web browser

    Applies to: Reolink cameras with the SD card slot (except battery-powered cameras, E1, E1 Pro, and Reolink Lumus) and NVRs.

    Step 1. Log in to your device via a web browser. Click the gear icon on the top right to get to the Camera Settings page.

    Step 2. Click Surveillance > Record > Post-Motion Record. You can see different options that can be selected. 

    post motion record web

  • Via Monitor (Reolink NVR with New UI)

    Click Settings (the menu bar location may vary depending on the NVR version, it could be at the top or bottom, refer to your actual NVR interface) > Surveillance > Record Settings. You can set your camera to Extend recording time after a motion event ends. Done!

    record settings on nvr
    post motion record on nvr

  • Via Reolink NVR (Old UI)

    Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

    Go to Menu > Recording > Option page, and click Record Extension to choose the time, click Apply to save the settings.

    POE main menu

    post motion recording

Related Articles

Reolink Camera Not Recording to SD Card

Reolink NVR Not Recording

SD Card Format Failed on Reolink Device

How to Set up Motion Recording on SD card, Reolink NVR and Home Hub

Done! With help of post-motion recording, you can see more details for every events. If you need further assistance, you can click "Submit a Request" below for more information.