Applies to: All bullet cameras.
You can follow these steps to install Reolink bullet cameras to the ceiling.
Step 1. Take out the mounting wrench, adjust the camera to any angle you want.
Step 2. Tighten this screw toward the direction of the Lock symbol after you adjust the camera to a suitable angle.
Step 3. Drilling three screw holes on the wall according to the mounting hole template.
Step 4. Secure the camera in place by tightening the screws.
Step 5. If you want to adjust the angle of this camera, you can loosen the screw toward the direction of Unlock symbol.
1. Twist it with the wrench to unlock, and adjust the cam (green part) in any directions.
2. After adjustment, twist it back to lock it.
3. Store the wrench here for later use.