This article will tell you how to playback recordings with sound on Reolink PoE NVR.

Applies to: Reolink PoE NVRs with hardware version H3MB02/H3MB16.

Note: Please remember to connect a speaker to your NVR. Before you start, please enable audio for recording by referring to How to enable audio for recording and live viewing on PoE NVR.

The following steps describe how to playback recorded videos with sound on Reolink PoE NVRs.

Step 1. Log in to your NVR on the monitor, go to Menu > Search > Playback, and select the channels you want. Customize the Video Type, Start Time, and End Time. Then click the Search button to search for the recordings you want.

search_for_recordings.png

Step 2. Click the Play button to playback the recordings you choose.

play_recordings.png

Step 3. Select the channel(s) for synchronous playback (at a maximum of 4 cameras), then click OK to start to play back.

synchronous_playback_on_nvr.png

Step 4. On the playback page, click mute.png to play sounds and adjust the output volume of recordings.

play_audio.png