Working Modes
- Standby Mode: The camera is in power-saving mode; there is no live view or motions detected.
- Working Mode: The camera is running at full capacity. It enters the working status when someone is accessing the camera via Reolink software or the PIR motion sensor detects a movement.
Status LED
There is a LED light in the front of the camera which indicates the camera's different statuses.
- Picture: Red LED and Blue LED
Voice Prompt | LED Status | Camera Status |
SIM card cannot be recognized | Red LED is solid on for some seconds and then starts to flash | The camera cannot recognize this SIM card |
The SIM card is locked with a PIN. Please disable it. | Your SIM card has a PIN | |
Network connection failed | Red LED is solid on for some time and then goes off completely | The camera fails to be registered to the operator network |
Blue LED will not go solid and just go off | The camera fails to connect to the Reolink server |
Comments
0 comments
Article is closed for comments.