Introduction for the Working Modes and the Status LED of Reolink GO

Applies to: Reolink Go.

Working Modes

Standby Mode: The camera is in the power-saving mode; there is no live view or video recording.
Working Mode: The camera is running at full capacity. It enters the working status when someone is accessing the camera via Reolink software or the PIR motion sensor detects a movement.

Status LED

There is a LED light in the front of the camera which indicates the camera's different status.

Voice Prompt	LED Status	Camera Status
SIM card cannot be recognized	Red LED is solid on for some seconds and then starts to flash	Camera cannot recognize this SIM card
The SIM card is locked with a PIN. Please disable it		Your SIM card has a PIN
Network connection failed	Red LED is solid on for some time and then go off completely	Camera fails to be registered to the operator network
Network connection failed	Blue LED will not go solid and just go off	Camera fails to connect to the Reolink server