Here we'll guide you to set the post-motion recording via a web browser.
Applies to: Reolink cameras with the SD card slot (except battery-powered cameras, E1, E Series E320, E1 Pro, E Series E330, and Reolink Lumus)
Step 1. Log in to your camera via a web browser. Click the gear icon on the top right to get to the device settings page.
Step 2. Click Surveillance > Record > Post-Motion Record. You can see different options that can be selected.
For standalone cameras, you can select 15 secs/30 secs/1 min.
For NVRs, you can select 1 min/2 min/5 min/10 mins.
If the web interface of your device is an old version, you could refer to the steps below.
Step 1. Log in to your camera via a web browser and go to the device settings page.
Step 2. Click Recording > Advance > Post-Record. You will see the three options of time duration, and you can select one of them as you want.