If you enable Overwrite, the camera will keep recording new videos and overwriting the old videos when the SD card or hard drive is full.  Here we'll guide you to set up overwrite when the SD card is full via Web Browser.

Applies to: Reolink cameras with the SD card slot and support web access (except E1, E1 Pro, and Reolink Lumus)

Step 1. Log in to your camera via a web browser. Click the gear icon on the top right to get to the device settings page.



Step 2. Click Surveillance > Record. Toggle the switch to enable Overwrite


If the web interface of your camera is an old version, you can refer to the steps below. 

Step 1. Log in to your camera via a web browser and go to the device settings page. 

Step 2. Go to Device Settings Recording > Advance, and then enable Overwrite.