Applies to: RLC-410; RLC-410-5MP; RLC-410S; RLC-411; RLC-411-5MP; RLC-411S; RLC-411S-5MP; RLC-420; RLC-420-5MP; RLC-422-4MP; RLC-422-5MP; RLC-423; RLC-423S; RLC-511; RLC-520; C1; C1 Pro; C2; C2 Pro; E1 Zoom; RLC-410W; RLC-410W-5MP; RLC-410WS; RLC-411WS; RLC-411WS-5MP; RLC-422W; RLC-423WS; RLC-511W;RLC-422W-5MP; RLN16-410;RLN8-410; RLN8-410-E; RLC-510A;RLC-810A;RLC-522
Note: Please verify that your FTP server is working properly before configuring FTP settings on Reolink Client. If you don't have one, see how to build FTP Server on Your PC (Cerberus FTP Server).
You may follow the steps below to set up FTP via Reolink Client.
Step 1. Launch Reolink Client, log into your device and click Device Settings.
Step 2. Go to Network -> Network Advanced, click Setup button next to FTP.
Step 3. Complete the information required and click Setup next to FTP Schedule.
- FTP Server: Type in the address of your FTP server and FTP Port. The default FTP Port for Reolink products is 21.
- User Name and Password: Enter the User Name and Password of your FTP server. If there is no username and password required, please check Anonymous.
- Directory: Set an upload directory for device video recording. You may also leave it blank.
- File Type: Choose to upload both video and picture or picture only.
- FTP Postpone: Set the record time limit after a motion is detected. This option is only available when File Type is Video and FTP Schedule is Motion.
- Interval: Setup the time interval of uploading pictures. This option is only available when selecting Picture as File Type. The time interval can be customized and the minimum time interval is 2 seconds.
Step 4. Check Enable. Click Normal and check all the grids.
Note: Normal means that the camera will record for 24/7 and Motion means that the camera will record when a motion is detected.
Step 5. click OK to save the settings. Click FTP Test to check whether FTP has been setup successfully.
If you see FTP Login Failed, please click to troubleshoot the issue.