This is a simple guide to help you in the installation of Reolink Go, Go Plus and Go Ultra. You can choose to mount it on the wall or on a tree.

Mount the Camera to the Wall

Step 1. Drill holes in accordance with a mounting hole template, and screw the security mount onto the wall.

1.drill_holes.png

Note: If you are mounting the camera on any hard surface, insert plastic anchors into the holes first.

Step 2. Install the camera on the security mount.

2.screw_the_camera.png

Step 3. Loosen the adjustment knob counterclockwise on the security mount and turn the camera until you get an ideal view.

3.loosen_the_knob.png

Step 4. Tighten the adjustment knob clockwise to fix the camera.

4.tighten_the_knob.png

Mount the Camera to a Tree

Step 1. Thread the strap through the slots of the mounting plate.

1.thread_the_strap.png

Step 2. Fix the plate to the mount with screws.

2.screw_plate_to_security_mount.png

Step 3. Fasten the strap onto the tree firmly.

3.tighten_the_strap_to_tree.png

Step 4. Attach the camera to the mount in the same way as in mounting it to the wall.

4.attach_the_camera.png