How to Set up Continuous Recordings via Reolink NVR

This article will show you how to upload continuous recordings to NVR with a monitor connected.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06) and WiFi NVRs (hardware version H2MB11 and H3MB13).

Note: Once you set up Continuous Recording on NVR, the recording will be recorded to the NVR automatically.

For Reolink PoE NVR

Follow the steps below to set up the POE NVR to record videos continuously.

Step1. Get to Menu > Recording > Schedule page.

Step2. Select the channel, check Enable and click Normal, then select the grids.

Step3. Click Apply to save the settings. And you may also click Copy to and copy the settings to other channels, then save the settings.

For WiFi NVR

Follow the steps below to set up the WiFi NVR to record videos continuously.

Step1. Get to Menu > Recording > Schedule page.

Step2. Check Enable. Select the channel and click Normal, then select the grids.

Step3. Click Apply to save the settings. And you may also click Copy to and copy the settings to other channels then save the settings.