A Preset is a user-defined position of the camera‘s pan/tilt and zoom settings. Creating camera presets in advance allows it to easily go to the wanted monitoring positions.

Below are the instructions showing how to set up preset points for your camera via Reolink App. 

Applies to: E1, E1 Pro, E1 Zoom, E1 Outdoor Series (E1 Outdoor, E1 Outdoor PoE, E1 Outdoor Pro, E1 Outdoor S, E1 Outdoor CX), RLC-523WA, RLC-823 Series (RLC-823A, RLC-823A 16X, RLC-823S1, RLC-823S2, RLC-823S1W), RLC-81PA, RLC-830A, Reolink TrackMix Series (TrackMix, TrackMix LTE, TrackMix WiFi, TrackMix PoE, TrackMix LTE Plus, TrackMix Wired LTE), Argus PT Ultra, Go PT Plus, Go PT Ultra, Reolink KEEN Ranger PT, Reolink Go Ranger PT, Argus Track

Step 1. Go to the live-view page of the camera, and tap the PTZ icon. Aim your camera at a specific area by panning, tilting, or zooming the camera. 


Step 2. Tap the Preset icon preset_icon.png. It will show No data if there are no preset points yet. 


Step 3. Tap the Add buttonplus_icon.png to add a new preset point. Name the preset point and tap Confirm to save the point. 


Note: There will be a snapshot showing the current point you set. It will be convenient for you to manage the point later. 

Step 4. You can repeat the previous steps to create more presets. If you tap on the preset, the camera will turn to the preset point immediately.

Step 5. You could also edit the preset's name or delete the preset point by tapping the edit icon or Trash Can icon.