Network general settings include static IP or DHCP, checking IP address, gateway, and DNS. You may follow the steps below to set up network general settings via a web browser.

Applies to: All Reolink products (except battery-powered ones, Reolink E1, E1 Pro, Reolink Lumus)

Step 1. Log into your cameras/NVRs via the web browser, then go to Device Settings > Network > General page.

general_network_1.png

Step 2. Expand the menu to choose a network access type for your cameras/NVRs, then click OK button to save your settings.

network_access.png

Notes:

  • There are two options under Network Access, one is Static and the other is DHCP. If you choose DHCP mode, the Router/NVR will automatically assign an IP address for the camera. If you choose Static mode, you need to set an IP address of the same network segment by yourself.
  • The Network Access is set as DHCP by default, and you can change it to Static if you want to assign a static IP address for your cameras/NVRs.