This article is about the interface specification of the Reolink DC adapters.
Applies to: All Reolink cameras and NVRs
|
Interface specification |
NVRs | RLN36 | OD5.5*ID2.1mm |
| PoE NVR (8/16 channel) | φ6.5*10mm | ||
| WIFI NVR |
φ5.5mm*2.1mm*10mm |
||
|
Cameras |
PoE cameras & WiFi cameras (C/E series/Lumus excluded) |
φ5.5mm *2.1mm*10mm | |
| C series | Micro USB | ||
| Battery-powered cameras | Micro USB/Type-C | ||
| E series |
φ2.5*φ0.7*9mm protruding core length:9mm |
||
| Lumus |
inserted power cable (about 2.9m) φ3.5*φ1.35*10mm |
||
|
Doorbell WiFi |
φ4.0*φ1.7*10mm |
||
| Trackmix WiFi | φ5.5*φ2.1mm*10mm |
Notes:
- To know about the types supported by the Reolink DC adapters, please see Types-of-Power Adapters.
- Reolink battery-powered cameras can also be charged by solar panels.
- The power cable of Reolink Lumus can't be removed and disassembled.
Notes:
- The length of the power cable is 1.2m.
- If you want to install the camera outdoors, please cover the exposed extension cable outside to avoid water leakage or other circumstances that may damage the cable.
- If your camera can't be powered on at all, please check whether the cable or power adapter is working properly or use another cable or power adapter to see if it works.
Reolink C series cameras can only be powered with the micro-USB port of the DC 5V/2A power adapter (included in the product box).
Note: The length of the power cable is 3m.