This article will guide you on how to change the date and time format, the time zone, and use NTP to synchronize time for your camera or NVR.

Applies to: All Reolink products except the battery-powered cameras, Reolink E1, Reolink E1 Pro, and Reolink Lumus

Step 1. Log into your cameras/NVRs via a Web Browser, and click the gear icon on the top right to get to the device settings page. 

log-in-on-IE-browser.png

Click_settings_icon_web.png

Step 2. Go to System > Date & Time. Click the settings icon settings_icon.png to get the drop-down menu. 

Select the Time Zone that you want to change to, then click Confirm to save the settings. 

date_and_time_new_ui.png

select_time_zone.png

Step 3. If you want to use NTP(Network Time Protocol) to synchronize the time, you can click Set Up and turn on Auto-Synchronize. Then click Save.

ANTO-SYNC.png

Step 4. Choose the format for time and date separately. 

time_and_date_format.png

 

If the user interface of your device is an old version, please check the steps below. 

Step 1. Log in to your camera via web browser and go to the device settings page. 

Step 2. Click System General > General. 

general_settings_old_ui.png

Step 3. Select the Time Zone according to your place of residence, then click OK button to save the settings.

time_zone_old_UI.png