Applies to: Reolink cameras which has speaker
What is Voice Prompt?
Voice Prompt refers to the feature that the camera will speak reminders in English to remind us the status of this camera during the initial setup procedure. It can help us properly finish the setup wizard and diagnose issues if we have trouble finishing the initial setup procedure.
How to use Voice Prompt?
Please see below tables for the Voice Prompt reminders and it's meanings.
||For Reolink Go and Reolink Go PT||Meanings||What to do|
|1||camera is starting up，please wait||Camera is starting up normally||Follow the setup wizard on Reolink app|
|2||sim card can not be recognized||SIM card isn't inserted or recognized||Trouble shoot refer to SIM Card Cannot be Recognized|
|3||network connection succeeded||Camera is connected to 3G/4G network successfully||Follow the setup wizard on Reolink app|
|4||network connection failed||Camera failed connected to 3G/4G network||Trouble shoot refer to Reolink Go Failed to Connect to the Network|
|5||sim card has a pin，please turn it off||Camera failed connected 3G/4G network due to SIM card has pin lock||Turn off the pin lock on your SIM card, you may contact the carrier for help|
|6||music tone||Reset is successful||/|
|No||For Reolink Argus series, E1 series and Reolink Lumus||Meanings||What to do|
|1||camera has been started up, please run Reolink app at the camera and set it up||Camera is starting up normally||Install and open Reolink app on your phone|
|2||please run Reolink app at the camera and set it up||Camera is ready for set up||Use Reolink app to scan QR code on the camera sticker|
|3||ding,ding,ding(beeping)||Camera is ready for set up||Use Reolink app to scan QR code on the camera sticker|
|3||scan succeeded||Camera has scanned QR code on the phone successfully||If you don't hear it, trouble shoot refer to Camera Failed to Scan the QR Code on the Phone APP|
|4||camera is connecting to your router please wait||Camera is trying to connect to router||Please just wait a moment while the camera is trying to connect|
|5||connection to the router failed||Camera has failed to connected to router||Trouble shoot refer Wi-Fi Connection Failed when Setting up Battery-Powered Cameras and E Series|
|6||connection to the router succeeded, welcome to Reolink||Camera has connected to router successfully||Follow the setup wizard on Reolink app to finish the set up|
|7||factory reset succeeded||Reset is successful||/|
Can I adjust the volume of Voice Prompt?
The volume of the camera's voice prompt is built-in with the firmware, and cannot be adjusted. If you find the volume of voice prompt is low, please try to set up the camera in a quiet place.