Reolink battery-powered Cameras with smart Person/Vehicle Detection support setting up non-detection zone to reduce false alarms. Here we will guide you on how to set the detection zone via Reolink Client.
Applies to: Argus 2E (3MP), Argus Eco (3MP), Argus Eco Pro, Argus Eco Ultra, Argus 3 Pro, Argus 3 (2K), Argus 3 Ultra, Argus 3E, Argus PT (2K), Argus PT Lite, Argus PT Ultra, Argus Track, Argus 4, Argus 4 Pro, Reolink Go Plus, Reolink Go PT Plus, Reolink Go Ultra, Reolink Go PT Ultra, Reolink Go Ranger PT, Reolink Duo (battery), Reolink Duo 4G, Reolink Duo 2 (battery), Reolink Duo 2 LTE, Keen Ranger PT, Reolink TrackMix (battery), Reolink TrackMix LTE, Reolink TrackMix LTE Plus.
Step 1. Launch Reolink Client and log in to the camera, then go to Device Settings > Alarm Settings > Motion Detection.
Step 2. Go to Non-Detection Zone to customize the detection zone for different alarm types.
Step 3. Click Set Up to create a zone over the area where you don't want to receive alerts for different alarm types. Please don't forget to click the Save button to save your settings.
Notes:
- The alarm types may be slightly different according to different camera models.
- Motions in the area covered with GREY grids will not be detected.
- For alarm types like Person, you can use the pen to draw no-alarm zones, and use the eraser to modify the drawn zone; For the "Others" alarm type, you can only Add all Detection Zone and Delete all Detection Zone.