Reolink battery-powered Cameras with smart Person/Vehicle Detection support setting up detection zone to reduce false alarms. Here we will guide you on how to set the detection zone via Reolink Client.
Applies to: Argus 2E 3MP, Argus Eco 3MP, Argus 3 Pro, Argus 3 2K, Argus PT 2K, Argus PT, Reolink Go Plus, Reolink Go PT Plus, Reolink Duo, Reolink Duo 4G, Reolink Duo 2, Reolink Duo 2 LTE, Reolink TrackMix LTE, Reolink TrackMix LTE, Reolink TrackMix LTE Plus and Keen Ranger PT.
Step 1. Launch Reolink Client and log in to the camera, then go to Device Settings > Alarm Settings. Find Detection Zone to customize the detection zone for different alarm types.
Note: The alarm types may be slightly different according to different camera models.
Step 2. Click Set Up to create a zone over the area where you don't want to receive alerts about the alarm type chosen. Please don't forget to click the Save button to save your settings.
- Motions in the area covered with GREY grids will not be detected.
- For alarm types like Person, you can use the pen to draw no-alarm zones, and use the eraser to modify the drawn zone; For the "Others" alarm type, you can only Add all Detection Zone and Delete all Detection Zone.
Comments
0 comments
Article is closed for comments.