Applies to: Argus 3 Pro, Argus 3 (2k), Reolink Go Plus, and Reolink Go PT Plus
You may follow the steps below to set motion detection zones for your battery-powered cameras via Reolink App.
Step 1. Launch Reolink App and log in to the camera, then go to Device Settings ->Detection Alarm->Detection Zone page.
Step 2. You could click to set person detection zone, vehicle detection zone, and motion detection zone.
Select no-alarm areas within the monitoring range with the Pen. You also can use the Eraser to modify the setting. And then click Save to save the settings.
Comments
0 comments
Article is closed for comments.