Applies to: Argus 3 Pro, Argus 3 (2k), Reolink Go Plus and Reolink Go PT Plus.
Step 1. Log in the camera and go to Device Settings -> Surveillance -> Record page:
Step 2. Click on Enable Record to unfold the schedule.
Step 3. Check the Alarm type for the camera to record. Or uncheck the Alarm type for the Go Plus to not record.
Step 4. Select Enable or Disable, then tap on the squares to set the schedule as you need and click Save to save the settings. One square means one hour.
Notes:
1. The blue grid means that the device will record to the SD card when motions are detected, while the grey one means “don’t record”.
2. The Alarm Type may differentiate from the Firmware Version and Hardware Version of the camera.
1. The blue grid means that the device will record to the SD card when motions are detected, while the grey one means “don’t record”.
2. The Alarm Type may differentiate from the Firmware Version and Hardware Version of the camera.
Comments
0 comments
Article is closed for comments.