How to Set up Record Schedule via Reolink Client for Battery-powered Cameras

Here we will show you how to set up a recording schedule for some of the battery-powered cameras via Reolink Client. 

Applies to: Argus 3 Pro, Argus Series B330, Argus 3 (2K), Argus PT (2K), Argus PT Ultra, Argus Series B440, Go PT Ultra, Reolink Go Plus, Go Series G330, Reolink Go PT Plus, Go Series G430, Reolink Duo, Reolink Duo 4G, Reolink Duo 2, Reolink Duo 2 LTE, Duo Series G750, Keen Ranger PT, TrackMix, TrackMix LTE, Reolink Altas PT, Reolink Altas PT Ultra.

For Reolink battery-powered cameras with smart detection features, you can set up a record schedule for them following the steps below.

Step 1. Log in to the camera and go to Device Settings > Surveillance > Record.

Step 2. Make sure the Enable Record button is turned on, and then click Schedule.

Step 3. Select the Detection Type you want the camera to record when motion is detected. 

Step 4. Click Enable or Disable, then click the grids to customize the recording schedule. One grid means one hour. After that, click Save to save your configurations.

For Reolink Altas PT and Reolink Altas PT Ultra, which support continuous recording to microSD card (it is not available for NVR and Home Hub currently), the interface may be slightly different. You can click Timer button to set up the time. Then, click Save to save your configurations.