When you view your camera on Reolink Client, you can manually take a snapshot of the camera image or record a video clip manually. 

Applies to: All Reolink cameras and NVRs

If you haven't installed the latest Reolink Client on your PC, please go to our download center to download and install it.

1. How to manually capture images

Step 1. Log in to your camera or NVR on the Reolink Client. Click the camera icon on the Live View page.

1._snap_on_client.png

Step 2. Find the storage path of the captured pictures.

Click the gear icon on the top right corner to pop out the Client Settings page. Go to General > Save Captured Images to. Now you can see the storage path of the captured pictures.

If you want to change this storage path, click Browse and choose the directory you want to save pictures.

2._change_saved_picture_path.png

2. How to manually record

Step 1. Click the record icon on the Live View page and the camera will start to record. Click again to stop recording.

3._manually_record_on_client.png

Step 2. Find the storage path of the manually recorded videos. 

Click the gear icon on the top right corner to pop out the Client Settings page. Go to Record > Record Videos to. Now you can see the storage path of the recorded videos.

If you want to change this storage path, click Browse and choose the directory you want to save videos.

4._change_record_path.png

Here is video for your reference: