If you want to set up the IR lights of your camera, check the guides below for detailed information.

Applies to: All Reolink cameras except RLC-812A, RLC-824A, CX410, ColorX Series P320X, CX410W, ColorX Series W320X, CX810, ColorX Series P330X, CX820, ColorX Series P335X, E1 Outdoor CX, E Series E530X, Argus 4 Pro, Argus Series B740X, Reolink Altas PT, Reolink Altas PT Ultra and cameras with hardware version IPC_3816.

  • Reolink App

    Step 1. Go to Device Settings > Light.

    device settingslight

    Step 2. Go to Infrared Lights and tap Auto to activate the IR lights. Also, you can select Stay Off to disable the IR lights all the time.

    ir lights.jpgAuto mode

  • Reolink Client

    Step 1. Login to your device and then go to Camera Settings > Camera > Light.

    Step 2. Select Auto if you want to let the IR lights turn on automatically at night, or select Stay Off if you want to turn off the IR lights.

    IR settings new client

  • Reolink Web browser

    Step 1. Access the camera via Web browser: How to Access Reolink Product via Web Browsers

    Step 2. Click Advanced Settings > Infrared Lights. Choose Auto to activate the IR lights. Also, you can select Off to disable the IR lights all the time. Click Save to save all the settings.

    IR lights

  • Reolink NVR (new UI)

    To configure the Infrared Lights for your camera on Reolink NVRs, go to Settings > Camera > Audio and light > Infrared light.

    Off: Infrared light won't light up in the dark.

    Auto: Infrared light will light up in the dark.

    settingsenable ir

  • Reolink NVR (old UI)

    Step 1. Please go to Menu > Display > Camera > Camera Parameter page:

    POE main menu

    display camera parameter

    Step 2. Set the IR Light to use the Auto or Close, click Apply to save the settings.

    ir light