For cameras with smart detection, you could adjust the sensitivity for each detection type separately. This article will guide you on how to set it up step by step.
Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.
Step 1. Log in to the NVR on a monitor. Right-click on the live view page and click the Settings icon.
Step 2. Go to Camera > Detection page. Click the blue Settings under Sensitivity for Smart Detection.
Step 3. Drag the slider on the blue bars to adjust the sensitivity for each smart detection type.
- Low: camera detects moving objects with a high-similarity appearance to Person/Vehicle/Pet.
- Medium: camera detects moving objects with a medium-similarity appearance to Person/Vehicle/Pet.
- High: camera detects moving objects with a low-similarity appearance to Person/Vehicle/Pet.
Note: The detection type may vary according to different camera models.
Here is a video that will show you how to set smart detection via the NVR System.