Follow the steps below to set up the quality settings such as resolution, bitrate, and frame rate for the cameras that are connected to the NVR.
Applies to: RLN8-410, RLN16-410 and RLN36
Here is a video to show how to reduce the main stream resolution of the camera on the monitor:
Step 1. Log in to the NVR and go to Setting > Camera > Stream page.
Step 2. Select the channel (Camera No.) you need and change the settings as you need. Then click Apply to Other Camera to copy the same settings to other channels.
Note:
1. For the Encoding Parameters/Resolution/Max. Frame Rate/Max. BitRate, refer to How to Set up the Record Encode for Reolink Cameras.
2. The resolution of the recording video will also change after you set up the parameters for the camera.
Comments
0 comments
Article is closed for comments.