Below is a video and a simple guide to instruct you to change the display setting for the camera via the Reolink Client. For example, change the camera's name position, date and time position, hide the watermark, etc.
Applies to: All Reolink cameras.
Here is a video about how to configure the display settings via Reolink Client.
Step 1. Launch the camera on the client and go to Settings > Device > Display page.
Step 2. On the display settings page, you can change the settings below:
(1) Flip/Mirroring: Change the direction of the image by enabling or disabling these options. It's also related to the installation of your camera.
(2) Camera Name: Choose where the camera name is displayed.
(3) Date & Time: Choose where the date & time is displayed.
(4) Watermark: Enable/Disable Reolink watermark.
(5) Anti-flicker: If the image of the camera is exposed, you can try to adjust this setting.
(6) Privacy Mask: Set to block out specific areas.
(7) Advanced: Adjust brightness, contrast, sharpness, etc. Refer to:
How to Set up Advanced Image Settings for Battery-powered Cameras via Reolink Client (New Client)
How to Configure Advanced Image Settings via Reolink Client