How to Configure Advanced Image Settings via Reolink Client

Launch Reolink Client and go to Settings > Camera > Display page and click Advanced to configure more parameter settings for the camera.  

• Anti-flicker: Use this feature if some devices such as TV screens and lights are flickering.
  - 50GHz: Used for Australia and the UK.
  - 60GHz: Used for the USA and Canada.
  - Off: If the camera is for outdoor use, and the image is a bit exposed, please choose off.
• Day and Night: Set the camera’s color mode during different times of the day and night.
  - Color: The camera will show a color image which is usually in the daytime.
  - Black and white: The camera will show the image only with black and white which is usually during the night when the IR LEDs are on.
  - Auto: The camera will automatically switch between ​color and​ black and white​ according to the light conditions.
• Brightness: Use this feature to make the preview darker or brighter.
• Contrast: Select the contrast level to adjust the range of the light and shadow of the image.
• Saturation:  Adjust the vividness of the color of the picture. The larger the value, the brighter the color, the smaller the value, the lighter the color.
• Sharpness: Increase or Decrease the sharpness of the image objects' edges.
• Black & White and Color Switching Threshold: Adjust the threshold to adjust the day/night mode switch time. If you want the camera to stay in the color mode for a longer time, adjust the value to the right, do not exceed +45. If the camera is too early to switch to day mode, you can adjust this threshold to the left, but do not lower than -45.
• Color Day Mode (Color image): 
  - Manual: Drag the slider to set up the whole level of the bright and the dark for the color image.
  - Auto: The camera will automatically set up the whole level of the bright and the dark for the color image according to the light conditions.
• Black & White:
  - Manual: Drag the slider to set up the whole level of the bright and dark for the Black & White image.
  - Auto: The camera will automatically set up the whole level of the bright and dark for the Black&White image according to the light conditions.
• Color Night Mode (Only available for a camera with spotlight and takes effect with a spotlight on): 
  - Manual: Drag the slider to set up the whole level of the bright and the dark for the color image when the spotlight is turned on.
  - Auto: The camera will automatically set up the whole level of the bright and the dark for the color image when the spotlight is turned on according to the light conditions.
• Image Stitching: Click How to Set up Image Stitching via Reolink Client to adjust a better stitching effect.