How to Disable Motion Detection via Reolink Client (New Client)

Applies to: All Reolink cameras.

If you don't want the motion detection of your cameras to be triggered when movements appear in the detection area, you may refer to the following guides to disable it.

1. Disable Motion Detection for Reolink Battery-powered Cameras

For Reolink battery-powered cameras, you just need to turn off the PIR sensor, then the cameras will stop to detect motions.

Please go to Settings-> Detection page to click the Enable Alarm box to disable it. 

2. Disable Motion Detection for Reolink PoE/WiFi Cameras (haven't been added into NVRs)

For Reolink PoE and WiFi cameras, motion detection is enabled by default. If you don't want any motion to be detected, you may clear all the motion detection areas referring to How to Set up Motion Detection Area via Reolink Client (New Client)

3. Disable Motion Detection for Cameras Controlled by NVRs

Refer to the below step to enter the Detection page. Choose the channel, then uncheck the Enable Alarm box to disable motion detection.