This article will show you how to use NTP to synchronize time via Reolink NVR on the monitor.

Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36, NVS36 and RLN12W, NVS12W.

Step 1. Go to Settings > Network > Advanced page.

settings.png

ntp_settings.png

Step 2. Click NTP settings and choose the Sync button. You may get the NTP settings succeeded message at the bottom, then it synchronizes successfully. If it fails, please contact the support team for help.

ntp_settings_2.png