If you want to share the camera with others, but wish they do not have the same permission as yours, or you want to share the camera with others temporarily and want to stop them from using the camera, refer to this article to set up a user account. The methods vary depending on the device.

Applies to: All Reolink devices.

The method for adding a user account varies by device model. Please choose the corresponding instructions according to the specific settings interface of your device. If you do not see these two interfaces, it means your device does not support creating a user account. This is the case for battery-operated cameras without smart detection.

Situation 1: Add User under User Management

Step 1. Login to your device and then go to Device Settings > System > User Management page and click Add User.

add user

Step 2. Select User or Administrator and edit the username, enter the password and confirm the password. Click Save to save all the settings.

new user

Situation 2: Add User under Share Device

Step 1. Login to your device and then go to Device Settings, and then click Customize.

customize

Step 2. Go to System > Share Device page. Click the “+” in the upper right corner of the page.

share device

Step 3. Set up the User Permissions and then click Generate Authorization Code.

user setting

Step 4. Share the code or link to share the device to other users.

Note: The code valid for 30min.

code

Note: How to add device through Link?

link